Ferritin Quantitative Test

Dengue IgG/IgM Rapid Test

The Dengue IgG/IgM Rapid Test is a rapid membrane based chromatographic immunoassay for qualitative and differential detection of IgG and IgM antibodies to all four serotypes (DEN-1, DEN-2, DEN- 3 and DEN-4) of Dengue virus in human serum, plasma or whole blood. It is intended to be used by professionals as a screening test and provides a preliminary test result to aid in the diagnosis of primary and secondary Dengue infection. For professional in vitro diagnostic use only.

Product Detail

Introduction

 

The Dengue IgG/IgM Rapid Test is a rapid lateral flow immunoassay for the qualitative detection of qualitative and differential detection of IgG and IgM antibodies to all four serotypes (DEN-1, DEN-2, DEN-3 and DEN-4) of Dengue virus in human serum, plasma or whole blood and can give a result in 15 minutes by minimally skilled personnel without any laboratory equipment.

 

Product Features

 

Product Name:Dengue IgG/IgM Rapid Test

Sample Type:Serum, plasma or whole blood

Loading Volume:10ul

Reaction Time:15 mins

Shelf Life:24 months

Storage:36-96°F (2-40℃)


Test Procedure 


The test should be operated at room temperature 59-86°F(15-30℃).
1. Allow the test cassette, specimen and buffer to reach room temperature (15-30°C) before testing.
2. Remove the test cassette from the foil pouch and use it as soon as possible.

3. Place the test cassette on a flat and clean surface. Transfer the specimen by a pipette or a dropper:

To use a Pipette:

4. Transfer 10 μL of Serum, Plasma, or Whole blood specimen into the Sample Well (S) of the test cassette, then add 2 drops of buffer into the Buffer Well (B) and start the timer. Avoid air bubbles in the Sample and Buffer well.
To use a Dropper:
5. Hold the dropper vertically and fill the capillary part of the dropper (not to exceed the capillary part) with Serum, Plasma or Whole blood specimen (10 μL), then carefully dispense the specimen into the Sample Well (S) of the test cassette. then add 2 drops of buffer into the Buffer Well (B) and start the timer. Avoid air bubbles in the Sample and Buffer well.

6. Wait for the colored line(s) to appear and read the results at 15 minutes. Do not interpret the result after 20 minutes. If positive signal appears after 20 minutes, it should not be reported as positive.


Features

  • Highly Sensitive & Specific
  • Flexible Samply Type
  • Fast in 15 minutes
  • Simple Operation


Leave A Message

Please provide us with the information below, and we'll contact you as soon as possible.

Related Products
Dengue NS1 Antigen Qualitative Rapid Test
Dengue NS1 Antigen Rapid Test
The Dengue NS1 Antigen Rapid Test is a lateral flow immunoassay for the qualitative detection of Dengue virus NS1 antigen in human serum, plasma or whole blood. It is intended to be used by professionals as a screening test and provides a preliminary test result to aid in the diagnosis of infection with the dengue virus. For professional in vitro diagnostic use only.
Dengue Ag&Ab Combo  Rapid Test
Dengue Ag&Ab Combo Rapid Test
The Dengue Ag&Ab Combo Rapid Test is a rapid membrane based chromatographic immunoassay for for the qualitative detection of NS1 antigen and IgM/IgG antibodies to all four serotypes (DEN-1, DEN-2, DEN-3 and DEN-4) of Dengue virus in human serum, plasma or whole blood. It is intended to be used by professionals as a screening test and provides a preliminary test result to aid in the diagnosis of primary and secondary Dengue infection. For professional in vitro diagnostic use only.
Dengue Ag&Ab Combo  Rapid Test
Dengue Ag&Ab Combo Rapid Test
The Dengue Ag&Ab Combo Rapid Test is a rapid membrane based chromatographic immunoassay for for the qualitative detection of NS1 antigen and IgM/IgG antibodies to all four serotypes (DEN-1, DEN-2, DEN-3 and DEN-4) of Dengue virus in human serum, plasma or whole blood. It is intended to be used by professionals as a screening test and provides a preliminary test result to aid in the diagnosis of primary and secondary Dengue infection. For professional in vitro diagnostic use only.
BNP Rapid Quantitative Test (Chemiluminescence Immunoassay)
BNP Rapid Quantitative Test (Chemiluminescence Immunoassay)
BNP Rapid Quantitative Test (Chemiluminescence Immunoassay) is used for in vitro quantitative detection of the Brain natriuretic peptide (BNP) concentration in human plasma that contains EDTA anticoagulants and venous whole blood samples, mainly used for auxiliary diagnosis of cardiac diseases.
Biotime NT-proBNP Rapid Quantitative Test
NT-proBNP Rapid Quantitative Test
NT-proBNP is a marker for detecting heart function, with a long half-life and high specificity. Biotime NT-proBNP test kit detects the amount of NT-proBNP in human whole blood, serum and plasma samples.
hs cTnI Rapid Quantitative Test
hs cTnI Rapid Quantitative Test
cTnI, a crucial cardiac biomarker, assists in detecting and managing acute myocardial infarction and assessing patient risk in cardiovascular events. Biotime's hs-cTnI offers high sensitivity, compatibility with versatile samples, and stable performance. Trust our ideal biomarker for comprehensive acute coronary syndrome evaluation.
Biotime FLI-600 FIA Immunoassay Analyzer
FLI-600 FIA Analyzer
FLI-600 is a fluorescent immunoassay system with 6 channels that uses blood and urine to measure the quantitative concentration of targeted analyte. Its automated test process enables to carry out multiple simultaneous tests for six different samples.
FT4 Rapid Quantitative Test (Chemiluminescence Immunoassay)
FT4 Rapid Quantitative Test (Chemiluminescence Immunoassay)
FT4 Rapid Quantitative Test (Chemiluminescence Immunoassay) is used for in vitro quantitative detection of the Free thyroxine 4 (FT4) concentration in human serum, plasma that contains heparin /EDTA and other anticoagulants and venous whole blood samples, mainly used for auxiliary diagnosis of thyroid diseases.
Leave A Message

Leave A Message

    Please provide us with the information below, and we'll contact you as soon as possible.

Home

products

about

contact